EA Detox De-chlorinator

As all fishkeepers know, it is necessary to remove chlorine and other impurities from tap water when introducing it to a pond or aquarium. Failure to do this can result in fish health problems and it also adversely affects the growth of benefical bacteria in all filters. The most common method of dechlorination is to add chemical treatments to break down the chlorine. This method is costly and can require accurate measurement of the amount of water to be treated. The De-Tox de-chlorinator simply connects in-line to a hose pipe with standard hose fittings (supplied). The De-Tox carbon filter removes the toxins in tap water prior to it coming into contact with your fish and filters.

HIGH GRADE ACTIVATED CARBON REMOVES:
chlorine chloramine bromine malachite green many dyes	colour e.g. humic acids organics e.g. proteins antibiotics hormones ozone
Why use DETOX...?
No messy cartridge changes - just unclip and replace Highest grade activated carbon 100% fish safe Extremely high toxin removal rate Simple to use - straight out of the box	Extremely economical - lowest cost per gallon of water treated Clean and ‘no hassle’ water changes via hose Can be used on a constant trickle feed ideal for first fill

Technical Information:
Model	Max Flow Rate	Treats Up To
De-Chlorinator FC - 12 Inch Filter	9 litres/min 2 gallons/min 2.4 US gallons/min	150,000 litres 33,000 gallons 39,600 US gallons
De-Chlorinator FC - 30 Inch Filter	9 litres/min 2 gallons/min 2.4 US gallons/min	350,000 litres 76,922 gallons 92,470 US gallons
All dependant on water quality and flow rate
The filter must not be used in freezing conditions as this can cause irreparable damage and invalidate your warranty.

PURE & SIMPLE
DE-TOX is an incredible new range of water purifiers that offer both excellent effiency and unrivalled value for money as some of their benefits.
FUNCTION
The new EA De-Tox range is a quick and simple method of filtering-out harmful chlorine and other impurities from tap water. Ideal for first fills, water changes and top-ups. No need to wait for the chlorine to “gas off”, just fill up straight from the hose pipe.
PREPARATION
“Purge” the filter for up to two minutes by opening the tap fully, allowing the exit water to run straight into a drain. Once the water runs clear, the filter is ready for use.

INSTALLATION
The filter can be used horizontally or vertically. Both ends can be used as either inlet or outlet points. Please observe the maximum flow rate recommended (2 gallons per minute) and drain after use before storage if being used temporarily and not as a permanent trickle. A lower flow rate will give better results and prolong the life of the product.
CONNECTION
Attach to your hose pipe using the supplied connectors.
STORAGE
Ensure the filter is kept in a cool, dark place and that the carbon is fully drained. Should the filter be used as part of a permanent top up system, keep the unit out of direct sunlight or high temperatures to achieve maximum filter life.

DISPOSAL
These filters are 100% recyclable, please dispose of as a plastic item.

Click here to view DETOX Dechlorinator installation & operating instructions.
Click Here to view assembly instructions.
You must have Adobe Acrobat Reader to view these files. If you do not have Acrobat Reader you can download it HERE.

Back to EA Products

EA Detox De-Ioniser