 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|||||||||||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|||
 |
 |
 |
 |
 |
 |
 |
 |
|
||||||||||||
 |
 |
 |
 |
 |
 |
|
||||||||||||||
 |
 |
 |
|
|||||||||||||||||
|
A Pond Sieve is a simple to use and effective mechanical pre-filter for Gravity fed filter systems, pressurised filtration systems, and surface skimmers. |
|
This Cetus has a variable inlet height using the unique patented Pondflow regulation system – for use when gravity fed. This allows water levels within the pond to drop without causing the circulating pump to be starved of water. The Cetus will allow a skimmer or a bottom drain to accept vast amounts of waste without excessive cleaning needed to be carried out. The water must then be pumped to either a normal filter above pond level (Nexus Eazy/Eazy Pod) or to a pressurized filter. If pump fed, the sieve is placed above pond water level and then the exit water is gravity dropped into your main filter. It is advised that all pressurized filters be pre-filtered using a Cetus to reduce excessive backwashing and maintenance due to heavy solids. |
|
The
Cetus sieve is a totally new, bow screen pre-filter,
made using the latest rotational molding technology. With all of
its benefits and build quality, it is undoubtedly the best of its
kind on the market today in terms of quality and performance! It
is designed to efficiently and effectively remove large amounts
of mechanical waste from a pond. It can be set-up gravity or pump
fed and has many benefits over the original bow screen technology.| Max Flow: | 4,000 gallons/hr | Inlet: | Gravity-fed 4 inch, Pump-fed 2 inch110mm |
| Height: | 37.2 inches | Outlet: | Gravity-fed 1.5 inch, Pump-fed 4 inch |
| Width: | 22.4 inches | Outlet Waste: | 3 inch |
| Length: | 33.5 inches | Screen: | 300 micron |
The pond sieve will allow a skimmer or a bottom drain to accept vast amounts of waste without excessive cleaning needed to be carried out. The water must then be pumped to either a normal filter above pond level (Nexus Eazy/Eazy Pod) or to a pressurised filter. It is advised that all pressurised filters be pre-filtered using a pond sieve to reduce excessive backwashing and maintenance. |
The
pond sieve is a bow screen pre-filter which is designed to remove
large amounts of mechanical waste from a pond. This must be set-up
gravity fed (bottom drain or mid-feed) but has many benefits over
the original bow screen technology. This sieve has variable inlet
height using the unique PondflowTM regulation system (patent pending).
This allows water levels within the pond to drop without causing
the circualting pump to be starved of water. 
| Close up of Sieve 300 Micron Screen | Side View of Screen/dirt particles |
 |
 |
 |
Features: * Can be gravity or pump fed * Perfect fit screen so no waste can bypass * Totally reliable and simple to install * Plug and Play – comes with flexible boots to connect to pipe work * Greatly reduced backwashing / maintenance of pressurised filters * Robust one piece mould –no welded joints – no leaks! * Large waste collection area which slopes to sump outlet * Ideal for mechanically filtering skimmer lines * Patented float that gives constant flow for gravity-fed level fluctuations * Maximum flow rate 18,000 litres per hour * Tri-slot 300 micron wedge wire screen in 316L stainless steel on 100% of surface area * Increased levels of oxygen |
| Back to EA Products |
A Division of 1559339 Ontario Inc.
Web site design by Terri John
This web site and it's entirety are ©2003-2009 Canadian Koi and Pond