 |
|
 |
The
SMART UV Difference is Product Integrity!
SMART UVs are the first and only UVs supported with "Guaranteed Accurate
Flow Rates!" There is no second guessing with SMART UV flow rates because
each one is calculated using the Bolton Photosciences, Inc. "UV Calc"
Modeling Program. This is the same UV calculation that is recognized by
the United States Environmental Protection Agency! |
|
What
Is UV?
Ultraviolet light is a spectrum of light just below the
range of visible to the human eye (as shown at right). UV light
is divided into four distinct spectral areas with UV-C being (250-280
nm) the most lethal range to living microorganisms. UV-C is capable
of altering the DNA of living organisms and rendering them unable
to reproduce.
UV-C
light, when applied properly as a problematic waterborne |
|
algae
solution, is far superior to ozone and harmful algaecides. Most
importantly UV does not leave a residual in the water.
4
Steps to SMART UV Success
Using a UV Sterilizer successfully begins
with:
1. Identifying the "Target Microorganism" (example:
Waterborne Algae)
2. Identifying the Target Microorganism's Required UV Dose (example:
22,000 µWs/cm²)
3. Receiving Accurate UV Flow Rate Information from the UV Manufacturer
4. Select the correct UV model that delivers the Required UV Dose
at your
application's flow rate
|
The
"Required Microorganism UV Dose" bar graph below reveals
specific microorganisms and their established UV doses required
to achieve successful UV treatment.
The
speed at which the waterborne microorganisms travels through the
UV housing (across the UV lamp field) establishes the UV dose (µWs/cm²)
received. |
| Limitations:
UV Sterilization treatment takes place inside the UV exposure housing.
Exposure time between the waterborne microorganism and the UV-C light
is critical in achieving successful UV disinfection. The condition
of the application’s water will determine how well the UV-C
light penetrates through it (UV transmittance). UV-C is absorbed by
the targeted microorganism or by other organic waterborne particles.
It is for this reason that UV equipment should be positioned after
the mechanical filter. |

UV
Water Flow Rate Based On 90% UV Transmissibility
The Manufacturer's
Suggested UV Water Flow Rates
|
Flow
Rates that Match True UV Capacity
SMART
UVs are generally larger in size than competing UVs (as shown
to the right).This means they offer greater UV exposure--utilizing
the UV lamp to its maximum potential! SMART UV water flow
rates reflect true equipment capacity and real application
conditions…they are never exaggerated!
Emperor
Aquatics, Inc. is the only manufacturer that supplies you
with
UV water flow rates that represent true equipment capacity
in actual application conditions!
SMART
UV water flow rates take into account poor UV light transmittance
through “green water”—one reason why our
flow rates are so much lower than competing UV brands.
|
| Visit
http://www.uvcomparison.com/
for more information. |
|
The
Truth About UV's |
|
UV
Equipment
SMART UV Lite | SMART
UV Sterilizer | SMART HO UV | SMART
HO ML UV
HOSS UV Sterilizers (High-Output Stainless Steel)
| TadpoleUV | Tadpole
Filter | Retro-Fit UV | UV Replacement Parts |
| If
Long Distance please Call Toll Free 1-866-987-6993 |
EMAIL
US! |
| LOCAL
CALLS please dial:
(905)987-6993 |
Fax:
(905)987-6994 |
Business
Hours
Mon
: By appointment only
Tues & Wed : Closed
|
Thurs, Fri : 9:30am - 8:00pm
Sat : 10:00am - 9:00pm
Sun : 10:00am - 5:00pm
|
|
| After
Hour appointments available, please call to set up a time. |
 |
Credit
card payments are excepted via telephone, fax, and in-store only.
Please do not email us your credit card information.
For contact details please see the bottom of this page. |
 |
|
|
Canadian
Koi and Pond
A Division
of 1559339 Ontario Inc.
Web site design by Terri John
This web site and it's entirety are ©2003-2008
Canadian Koi and Pond |